Catalog JAES

ELBOW; TYPE: FEMALE THREADED. X FEMALE; ANGLE: 90; NOMINAL THREAD DIAMETER: 3/4"; NOMINAL THREAD DIAMETER: 3/4"; TYPE OF THREAD: GAS; MAXIMUM WORKING PRESSURE: 210 BAR; MATERIAL: ASTM A 105 CARBON STEEL; STANDARD: ANSIB 16.11

SPRING; INTERNAL DIAMETER: 25 MM; OUTSIDE DIAMETER: 44 MM; LENGTH: 89MM; TYPE: HEAVY LOAD; MATERIAL STANDARD: ISO 10243; RATE 288N/MM MAX. DEFLECT:34MM FREE LENGTH:89MM

HEAVY TYPE POLYPROPYLENE PIPE DN 8" EXTERNAL DIAMETER: 200 MM; THICKNESS: 10 MM

COPPER PIPE; OUTSIDE DIAMETER: 1/4 "

PLASTIC PLUG FOR 2 3/8" DIAMETER TUBE NUT-SB; DRAWING NUMBER: 960325104; EQUIPMENT: PMC TIGHTENER

HOSE ON A ROLL; TYPE: IN ROLL; NOMINAL INSIDE DIAMETER: 1; MAXIMUM WORKING PRESSURE: 120 PSI; HOSE MATERIAL: DIELECTRIC THERMOPLASTIC; STANDARD: BS-2050; ANTISTATIC HOSE; INTERMEDIATE FLEXIBILITY SUITABLE FOR SHORT AND LONG RUNS; LOW LINEAR WEIGHT; WITH ORANGE BAND - ELECTRICAL RESISTANCE BETWEEN 1000 AND 30000 OHMS/MT - FOR ANFO EXPLOSIVE PNEUMATIC CHARGE USE;

MECHANICAL SEAL; TYPE: WITH SPRING; SHAFT DIAMETER: 1 3/4 IN SERVICE: WATER

SEAL FOR ROTARY SHAFT; TYPE: RETAINER; MATERIAL: SYNTHETIC RUBBER; SHAFT DIAMETER: 56 MM; HOUSING DIAMETER: 76.6 MM; THICKNESS: 12.7MM; SHORE HARDNESS: 80-85 A

SEAL FOR ROTARY SHAFT; TYPE: RETAINER; MATERIAL: SYNTHETIC RUBBER; SHAFT DIAMETER: 70 MM; HOUSING DIAMETER: 90.25 MM; THICKNESS: 10MM; DURATION ZA SHORE: 80-85 A

SCREW - TYPE: LOWERED CYLINDRICAL HEAD (ALLEN) WITH INTERIOR HEXAGON; NOMINAL THREAD DIAMETER: 8 MM; THREAD TYPE: M8X1.25 ; LENGTH: 25MM; SCREW STANDARD: DIN6912; MATERIAL: STEEL; TYPES OF MECHANICAL PROPERTIES: STRENGTH CLASS 12.9

BOLT SCREW; TYPE: ALLEN W/CYLINDRICAL HEAD; NOMINAL THREAD DIAMETER: 24 MM; THREAD TYPE: M24 X 3; LENGTH: 320MM; THREAD LENGTH: 60 MM; SCREW STANDARD: A 574/ASME B 18.3.1 M/DIN 912; MATERIAL: STAINLESS STEEL; TYPES OF MECHANICAL PROPERTIES: 12.9

HANDLE FOR TAP MIN. DIAMETER THREAD: 1/4 MAXIMUM THREAD DIAMETER: 1

SEAL FOR ROTARY SHAFT; TYPE: SINGLE LIP WITH SPRING-LOADED METAL INSERT; MATERIAL: MILL RIGHTN NITRILE; SHAFT DIAMETER: 105 MM; HOUSING DIAMETER: 180 MM; THICKNESS: 12MM; SHORE HARDNESS: 70 A / 90 A; FLUID TWO: LUBRICATING OIL AND GREASE; TEMPERATURE RANGE: MAX 80 °C; MAXIMUM PRESSURE: 15 MPA; MANUFACTURING STANDARD: ISO 6194 / DIN 3760

RETAIN; INNER DIAMETER: 150 MM; OUTSIDE DIAMETER: 180 MM; THICKNESS/LENGTH: 14MM; PROFILE TYPE: SINGLE LIP; FLUIDS: GREASE; MATERIAL: NITRILE; SHORE HARDNESS: 70 - 90 A; MAXIMUM WORKING PRESSURE: 7 PSI; TEMPERATURE RANGE: - 40 - 120 °C

RUBBER SEAL INSIDE DIAMETER: 3 1/2; THICKNESS: 1,275; TEMPERATURE RANGE: 70 C; MATERIAL: RUBBER; FLUIDS: WATER; NOMINAL PIPE DIAMETER: 3 1/3; SHAFT DIAMETER 3 1/2; INCHES, DRAWING REFERENCE 10-816-4155, WITH CHANGES IN INSIDE DIAMETER TO 3 1/2;, SLEEVE 4 1/8;, NECK 4 3/8;, OVERALL DIA 15;, RUBBER RADIUS 1/4; , OVERALL THICKNESS 1.275

RETAIN; INNER DIAMETER: 250 MM; OUTSIDE DIAMETER: 280 MM; THICKNESS/LENGTH: 15MM; FLUIDS: GREASE

PLUG - TYPE: HEXAGONAL THREADED MALE; NOMINAL THREAD DIAMETER: 3/8; THREAD TYPE: NPT 3/8 -18; MAXIMUM WORKING PRESSURE: 3000 PSI; MATERIAL: STAINLESS STEEL ASTM A-182 F316; DIMENSIONS ACCORDING TO STANDARD: ANSI B16.11

DRAIN VALVE; TYPE: ESCAPE; THREAD DIAMETER: 1 TPI; FLUID DISCHARGE PRESS URE: 60,000 PSI; PAR60VM9071VALVE ASSEMBLY 20-61

CONICAL BORING; TYPE: CONICAL; MINOR DIAMETER: 9.9 MM; MAJOR DIAMETER: 1 3.4 MM; OVERALL LENGTH: 215 MM; MATERIAL: QUICK YEAR M2; REAMERING FOR PINS DIN 1 AND DIN 7978, CYLINDRICAL ROD, SQUARE STOP, RIGHT CUT; 5501 DIN 9A 10MM; 1:50 P.M.; MANUFACTURER 1: INDACO; N-PART 1: DIN 9 A ? TAPER 1:50 HSS 10 MM

O-RING; INTERNAL DIAMETER: 329.57 MM; THICKNESS: 5.33 MM; MATERIAL: FPM (VITON) BCT-10504 FG.05H