Catalog JAES

NEOPRENE O-RING INTERNAL DIAMETER: 5/16 "; OUTER DIAMETER: 7/16 "; THICKNESS: 1/1 6 "; MATERIAL: NEOPRENE; SHORE HARDNESS: 70 A; ORING MODEL 02-011. EXACT MEASUREMENTS I.D. 0.301", THICKNESS 0.07" /- 0.003", O.D. 0.435" - 0.447". PACK OF 50 ORINGS

NIPPLE; TYPE: FACU THREADING; NOMINAL DIAMETER: 1/4 IN; NOM. DIAMETER THREAD L1: 1/4 IN; L1 THREAD TYPE: 7/16-24; NOM. DIAMETER L2 THREAD: 1/4 IN L2 THREAD TYPE: 7/16-24; MAXIMUM WORKING PRESSURE: 2000 PSI; MATERIAL: STAINLESS STEEL ASTM A403 WP 316; DIMENSIONS ACCORDING TO STANDARD: ANSI B16.5 LENGTH: 2-5/8 IN; SCHEDULE 40

EXPANSION MEETING; NOMINAL DIAMETER: 1 25/32 "; MAXIMUM WORKING PRESSURE: 20000 KG/CM2; MATERIAL: COPPER

TEE; SCHEDULE/CEDULA: SCH 80; TYPE: STRAIGHT TEE 3" BW RL; NOMINAL DIAMETER: 3 "; MATERIAL: 304L STAINLESS STEEL; DIMENSIONS ACCORDING TO STANDARD: ASME 16.9; SEAMLESS, LONG RADIUS

ELBOW; SCHEDULE/CEDULA: 80; TYPE: ELBOW 45? BW RL; ANGLE: 45; NON-MINAL DIAMETER: 1-1/2 IN; MATERIAL: 304L STAINLESS STEEL; ELBOW 45? LONG RADIUS SEAMLESS BUTT WELDING

ELBOW; SCHEDULE/CEDULA: 80; TYPE: BW LONG RADIO; NOMINAL DIAMETER: 3 IN MAXIMUM WORKING PRESSURE: 150 BAR; MATERIAL: A/INOX 304

PNEUMATIC SAFETY VALVE INLET: FLANGE PN40 DIN 2545 (65MM/4X14MM) OUTLET: FLANGE PN40 DIN 2545 (85MM/4X14MM) ORIFICE DIAMETER: 13 MM ORIFICE AREA: MM2 NOMINAL PRESSURE: 40 BAR CALIBRATION PRESSURE: 28.00 BAR BACK PRESSURE: ATM OVERPRESSURE: 10% RECLOSURE WASTE: 15% OPERATING TEMPERATURE: -10/+120°C CALIBRATION PRESSURE ADJUSTMENT: ±5 FLUID: NITROGEN STATE: GAS -28 (BAR G) -1597 (KG/H) PRESSURE COEFFICIENT OUTFLOW: KDR GAS 0.78 DECLARATION OF CONFORMITY DOCUMENTS YEAR 2024

RETAINER FOR ROTARY AXIS; TYPE: DOUBLE LIP WITH METAL INSERT WITH RESO RTE; MATERIAL: VITON; SHAFT DIAMETER: 75 MM; HOUSING DIAMETER: 95 MM; THICKNESS: 10MM; SHORE HARDNESS: 80-85 A; FLUIDS: ISO HM32 OIL TEMPERATURE RANGE: -40 TO 205 ?C; MANUFACTURING STANDARD: ISO 6194 / DIN 3760

SEAL FOR ROTARY AXIS TYPE: DOUBLE LIP WITH METAL INSERT WITH SPRING; MATERIAL: VITON SHAFT DIAMETER: 170 MM; HOUSING DIAMETER: 200 MM THICKNESS: 15 MM; SHORE HARDNESS: 80-85 A; FLUIDS: ISO HM32 OIL TEMPERATURE RANGE: -40 TO 205 ° C MANUFACTURING STANDARD: ISO 6194 / DIN 3760

THERMORESISTANCE; TYPE: PT 100 OHMS; SHEATH DIAMETER: 6.4 MM; TOTAL LENGTH OF THE SHEATH: 40 CM; EP EPA-1440-PO-14-S-15.75-R ALUMINUM CONNECTION HEAD, NEMA 4X PROTECTION 1/2" NPTS PROCESS CONNECTION PT100 TYPE SENSOR, 3-WIRE CONNECTION SENSOR DIAMETER: 1/4" (6.4MM) SENSOR SHEATH MATERIAL: 316 STAINLESS STEEL SHEATH LENGTH: 40CM; EPA-1440-PO-14-S-7.88-R

BRAKE DISC AND COUPLING GEAR ASSEMBLY; DRAWING NUMBER: TM04-M-HTR02-0008649; SLOTTED DISC HOLDER: SAE 65 MATERIAL, 28 SLOTS, PRESSURE ANGLE 30°, DIAMETER OR PITCH 2.8", LARGER DIAMETER 2.9", SMALLER DIAMETER 2.65", SLOTTED PITCH 10/2 0. 6061 ALUMINUM ALLOY SLOTTED BRAKE DISC -T6, 28 SLOTS, PRESSURE ANGLE 30°, PITCH DIAMETER 2.8", LARGEST DIAMETER 2.939", SMALL DIAMETER 2.7", SLOT PITCH 10/20. GROOVED ACCORDING TO ANSI B92.1-1996 STANDARD - TM04-M-HTR02-0008649

ELBOW; TYPE: SHORT RADIUS BUTT WELDABLE; ANGLE: 90; NOMINAL DIAMETER: 3 IN; THREAD TYPE: N/A; MAXIMUM WORKING PRESSURE: 3000 PSI; MATERIAL: CARBON STEEL ASTM A234 WPB; FEMALE X FEMALE; CARD 80

CLAMP; CLAMP REPAIR; DIAMETER 4 "; SPLIT SLEEVE TYPE PLIDCO SS00400

O-RING; OUTER DIAMETER: 4 MM; THICKNESS: 4MM; MATERIAL: VITON; SHORE HARDNESS: 90

COMPLETE FILTER; CONNECTION DIAMETER: 3/8 IN; MAXIMUM OPERATING PRESSURE : 1 BAR; FILTRATE LEVEL: 10 MICRO M; FLUIDS: AIR; ME-5917 1/2 REV C ITEM30

VACUUM MANOMETER (PRESSURE INDICATORS); PRESSURE RANGE: 0-250 B AR; THREAD DIAMETER: 1/4 " NPT; CASE DIAMETER: 2-1/2 M; CONNECTION TYPE: BACK LOWER; 304 STAINLESS STEEL CASE SEALED BEZEL; BOURDON, PHOSPHOR BRONZE; FILLED WITH GLYCERINE, MOVEMENT, MATERIAL BRASS CONNECTION AND RESTRICTOR

GLOBE VALVE; NOMINAL SIZE: 3 IN; MOUNTING TYPE: FLANGED RF ACCORDING TO ANSI B16.5; FLUIDS: AIR, WATER, OIL AND GAS UP TO 450°F (250°C) BODY MATERIAL: CAST CARBON STEEL; PRESSURE: CLASS 150; MANUAL OVERRIDE; ASCENDING STEM; BODY MATERIAL STANDARD: ASTM A21 6 GRWCB; TRIM MATERIAL (STEM, PLUG, SEAT) API NO. 8 (13 C R Y HARDFACED); GENERAL DESIGN AND WALL THICKNESS STANDARD: API 600 / BS 1873; CLASS (PRESSURE-TEMPERATURE) ANSI B16.34; DISTANCE BETWEEN FACES AN SI B16.10; STANDARD FOR TESTING API 598; THE VALVE MUST BE PROVIDED WITH A LOCKING DEVICE SUITABLE FOR USING A PADLOCK WITH A N OMINAL LINK/RING DIAMETER OF 6 - PADLOCK HOLE DIAMETER 8 MM

LOCK OR GATE VALVE; TYPE: ASCENDING STEM; NOMINAL SIZE: 6 IN; MOUNTING TYPE: FLANGED RF ACCORDING TO ANSI B16.5; FLUIDS: AIR, WATER, OIL AND GAS UP TO 450°F (250°C); BODY MATERIAL: CAST CARBON STEEL; PRESSURE: CLASS 150; MANUAL OVERRIDE; BODY MATERIAL STANDARD: ASTM A216 GRWCB; TRIM MATERIAL (STEM, PLUG, SEAT) API NRO 8 (13 CR AND HARDFACED); FLEXIBLE CRADLE TYPE; GENERAL DESIGN AND WALL THICKNESS STANDARD: API 600 / BS 1414; CLASS (PRESSURE-TEMPERATUR A) ANSI B16.34; DISTANCE BETWEEN FACES ANSI B16.10; STANDARD FOR TESTING AP I 598; THE VALVE MUST BE PROVIDED WITH THE PTO LOCKING DEVICE TO USE PADLOCK WITH NOMINAL LINK/RING DIAMETER OF 6 - PADLOCK HOLE DIAMETER 8 MM

SWIVEL JOINT WITH DOUBLE CROSS LENGTH S= 210 MM HUB HOLE 35H7 WITH KEYWAY AND M10 GRUB SCREW HOLE AT 180° FROM THE KEYWAY ON BOTH SIDES. EXTERNAL DIAMETER 80 MM

HOLD ; INTERNAL DIAMETER: 190 MM OUTER DIAMETER: 220 MM; THICKNESS/LENGTH: 15 MM; GASKET TYPE: "C" TYPE RETAINER - ROTARY SHAFT LIP SEALS (FOREIGN STANDARD) DIN 3760