MỤC LỤC JAES

HYDR CAL 30MM PRESSURE REDUCER MAXIMUM RATE 315 BARS WITH VALVE INSTALLED ACCORDING TO DIN 24340 VIT SEALS

BOTTLE SEAL

MECHANICAL SEAL; TYPE: WITH SPRING; SHAFT DIAMETER: 1 3/4 IN SERVICE: WATER

SEAL FOR ROTARY SHAFT; TYPE: RETAINER; MATERIAL: SYNTHETIC RUBBER; SHAFT DIAMETER: 56 MM; HOUSING DIAMETER: 76.6 MM; THICKNESS: 12.7MM; SHORE HARDNESS: 80-85 A

SEAL FOR ROTARY SHAFT; TYPE: RETAINER; MATERIAL: SYNTHETIC RUBBER; SHAFT DIAMETER: 70 MM; HOUSING DIAMETER: 90.25 MM; THICKNESS: 10MM; DURATION ZA SHORE: 80-85 A

ELECTROHYDRAULIC BUCKET TYPE E 150 I ELECTROREVERS INCLUDES: -BUCKET E 150 I -WA02 AUTOMATION KIT -WATERTIGHT SEAL ON BUCKET BODY -NEMA MOTOR -PACKAGE

PROVISION OF A CAMERA FOR A14/A31 MODEL LETTER FILTER. THE FILTER SERIAL NUMBER IS 685. ACCORDING TO THE EXPLODED VIEW MANUAL, SAID CHAMBER IS IDENTIFIED WITH THE NUMBER 10.6. IT IS REQUIRED THAT TOGETHER WITH THE CHAMBER, ONLY THE SEALING O-RING INDICATED WITH THE NUMBER 10.7 BE PROVIDED. IT SHOULD BE NOTED THAT THE CHAMBER MUST BE SUPPLIED COMPLETE WITH ACCESSORIES (INTERNAL FLUID DEFLECTOR), AND MUST BE COMPLETELY COVERED WITH 4 MM THICK EBONITE

ROD SEAL INSTALLATION TOOL KIT

SEAL KIT; CLOSURE TYPE: GASKET KIT; FLUIDS: OIL; MATERIAL: VITON; MAXIMUM WORKING PRESSURE: 250 BAR; TEMPERATURE RANGE : 220°C TO -30°C

SEAL FOR ROTARY SHAFT; TYPE: SINGLE LIP WITH SPRING-LOADED METAL INSERT; MATERIAL: MILL RIGHTN NITRILE; SHAFT DIAMETER: 105 MM; HOUSING DIAMETER: 180 MM; THICKNESS: 12MM; SHORE HARDNESS: 70 A / 90 A; FLUID TWO: LUBRICATING OIL AND GREASE; TEMPERATURE RANGE: MAX 80 °C; MAXIMUM PRESSURE: 15 MPA; MANUFACTURING STANDARD: ISO 6194 / DIN 3760

RUBBER SEAL INSIDE DIAMETER: 3 1/2; THICKNESS: 1,275; TEMPERATURE RANGE: 70 C; MATERIAL: RUBBER; FLUIDS: WATER; NOMINAL PIPE DIAMETER: 3 1/3; SHAFT DIAMETER 3 1/2; INCHES, DRAWING REFERENCE 10-816-4155, WITH CHANGES IN INSIDE DIAMETER TO 3 1/2;, SLEEVE 4 1/8;, NECK 4 3/8;, OVERALL DIA 15;, RUBBER RADIUS 1/4; , OVERALL THICKNESS 1.275

SEAL, WATER, RUBBER, SHAFT DIA 2 15/16 INCH, DRAWING 10-816-4155

PAIR OF FRICTION SEALS X PMD - PMF PMD-PPD-PPD/N - PMF-PPF-PPF/N 2ND SERIES

TEST NIPPLE G1/4 TEST NIPPLE G 1/4 ALUMINIUM + AFM /B ALUMINIUM PRESSURE TEST POINT WITH SEAL

ROD T-SEAL; INTERNAL DIAMETER: .875; OUTSIDE DI AMETER: 1.125; THICKNESS/LENGTH: .187; MATERIAL: NITRILE; SHORE HARD NESS: 70A; MAXIMUM OPERATING PRESSURE: 5000 PSI; TEMPERATURE RANGE: -40 TO 225 °F

PISTON T-SEAL; INTERNAL DIAMETER: .875 IN; OUTSID E DIAMETER: 1.125 IN; THICKNESS/LENGTH: .187 IN; MATERIAL: NITRILE; SHOR E HARDNESS: 70A; MAXIMUM OPERATING PRESSURE: 5000 PSI; TEMPERATURE RANGE : -35 TO 220ºF

SEAL:O-RING O-RING TYPE: O-RING INSIDE DIAMETER: 13.29 THICKNESS: 1.78 OUTSIDE DIAMETER: MATERIAL: VITON90

STAND - SHAFT END COVER SEAL - ITEM #017 IN DRAWING 3410-M-CO-140-0171 - MATERIAL AFM38; DRAWING #: 3410-M-DT-140-0155

RUBBER FOR GENERATOR SEAL OIL PUMP COUPLING

SEAL - TYPE: BACKUP RING; MIN/ODR/100PCS