MỤC LỤC BOSCH REXROTH

PUMP FOR HYDRAULIC SYSTEM; CYLINDER CAPACITY: 8.2 CM3; MAXIMUM WORKING PRESSURE: 250 BAR; ENTRY D IAMETER: 20 MM;

PNEUMATIC CYLINDER; TYPE: TIE ROD; PISTON SIZE: 50 MM; STROKE: 55 MM; STEM: 20 MM; ANCHOR: M00, BASIC; MAXIMUM WORKING PRESSURE: 10 BAR; EFFECT TYPE: DOUBLE; STANDARD: ISO 15552; STEM THREAD: 32 MM S, SIZE: M16X1.5 MODEL: TRB-DA-050-0055-0-2-2-1-1-1BAS

PUMP FOR HYDRAULIC SYSTEM; MAXIMUM WORKING PRESSURE: 280 BAR; FLUIDS: ISO HM32 OIL; PUMP TYPE: PISTON; MODEL: A A10VSO140 DFR /31R-PPB12N0 0

DIRECTIONAL SOLENOID VALVE; NOMINAL SIZE: ISO 3; MAXIMUM WORKING PRESSURE: 10 BAR; MOUNTING TYPE: BASE PLATE ISO 5599/1; FLUIDS: AIR; NUMBER OF ROADS: 5/2; DRIVE TYPE: SOLENOID; ELECTRICAL VOLTAGE: 110 V / 120 V; FREQUENCY: 50HZ/60HZ; SINGLE SPRING RETURN SOLENOID

DIRECTIONAL SOLENOID VALVE; NOMINAL SIZE: TN10/D05; MAXIMUM WORKING PRESSURE: 315 BAR; MOUNTING TYPE: BAS E PLATE; FLUIDS: OIL; NUMBER OF ROUTES: 4/3; DRIVE TYPE: SOLENOID; VOLTAGE: 110 VAC / 120 VAC; FREQUENCY: 50 HZ / 60 HZ 4WE10J3X/CW110N9K4/V

PRESSURE CONTROL VALVE; TYPE: LIMITING; NOMINAL SIZE: 10; MAXIMUM OPERATING PRESSURE: 315 BAR; MAXIMUM FLOW: 330 L/MIN; ASSEMBLY T YPE: BASE PLATE; FLUIDS: OIL; PRESSURE REDUCING VALVE; MODEL: DBDS10K1X/315V

PROPORTIONAL AND SERVO VALVE; NOMINAL SIZE: 8; MAXIMUM OPERATING PRESSURE: 100 BAR; FLUIDS: OIL; VOLTAGE: 24 VDC; SOLENOID DIAMETER: 37MM; SERIES: A

PRESSURE CONTROL VALVE; SIZE 10 COMPONENT SERIES 4X MAXIMUM OPERATING PRESSURE 315 BAR MAXIMUM FLOW 100 L/MIN Z2DB 10 VC2-4X/315V

AIR LUBRICANT; MAXIMUM WORKING PRESSURE: 16 BAR; THE PRESSURE DEW POINT MUST BE AT LEAST 15?C AT AMBIENT AND AVERAGE TEMPERATURE AND CANNOT EXCEED 3?C. - OIL DOSAGE AT 1000 L / MIN [ DROPS/MIN]: 1-2 MAX. RESIDUAL OIL CONTENT ACC. ACCORDING TO ISO 8573- 1 AT OUTPUT: 10 MG/M?

PRESSURE CONTROL VALVE; TYPE: DIAPHRAGM; NOMINAL SIZE: 1/8 " MAXIMUM WORKING PRESSURE: 10 BAR; TYPE: DIAPHRAGM, SPRING LOADED - MEDIUM: COMPRESSED AIR, LUBRICATED OR NON-LUBRICATED

PRESSURE REGULATOR REXROTH DZ1 0-1-5X/200

PUMP FOR HYDRAULIC SYSTEM; CYLINDER: 16.5 CM3 MAXIMUM WORKING PRESSURE: 250 BAR; INLET DIAMETER: 3/4 IN FLUIDS: ISO HM32 OIL; PUMP TYPE: GEAR; FEATURES: HOURLY ROTATION, STD FIXING FLANGE; ISO CYLINDRICAL SHAFT TIP (DIAMETER 18); FKM GASKETS, FKM SEAL AZPF-11-016-RAB 01 PB

HYDRAULIC CYLINDER; SPECIAL TYPE; PISTON SIZE: 254 MM; STROKE: 508 MM; STEM: 180 MM; ANCHORAGE: MS3, CENTRAL LATERAL EARS; MAXIMUM WORKING PRESSURE: 150 BAR; FLUIDS: ISO HM32 OIL; EFFECT TYPE: DOUBLE; ACCORDING TO DRAWINGS: 671.03-M-10 FOLIO: 0 TO 9 AND 671.03-M-11 FOLIO: 0 TO 4; 4WEH 16 HD72/OF6EG24N9ES2K4/B10

HYDRAULIC CYLINDER; TYPE: HYDRAULIC CYLINDER; PISTON SIZE: 40 MM STROKE: 90 MM; STEM: 25 MM; ANCHORAGE: MF2, REAR RECTANGULAR FLANGE MAXIMUM WORKING PRESSURE: 210 BAR; FLUIDS: HYDRAULIC OIL; EFFECT TYPE: DOUBLE; CD 210 D 40/25 90 Z1X/01 HFDM 1.1.A

PRESSURE RELIEF VALVE

CLOSING AND NON-RETURN VALVE; NOMINAL SIZE: TN16; MAXIMUM WORKING PRESSURE: 350 BAR; MOUNTING TYPE: BASE PLATE; FLUIDS: ISO HM3 2 OIL; MAXIMUM FLOW: 300 L/MIN; MODEL: Z2S16-1- 5X

DIRTY FILTER INDICATOR PRESSURE SWITCH; FLUIDS: OIL; ROUND PLUG-IN WITH CONNECTION M12X1, 4-POLE - 150 VDC-VAC - 20 W - IP 67 - AMBIENT TEMPERATURE RANGE: -25 … +85°C - TYPE OF PRESSURE MEASUREMENT: PRESSURE DIFFERENTIA L MODEL: WE-1 SP- M12X1

DIRECTIONAL SOLENOID VALVE; NOMINAL SIZE: 10; MAXIMUM WORKING PRESSURE: 350 BAR; MOUNTING TYPE: SUBPLATE; FLUIDS: OIL TE; NUMBER OF ROADS: 4/3; DRIVE TYPE: SOLENOID; ELECTRICAL VOLTAGE: 96 V; FREQUENCY: 50/60 HZ; MODEL : 4WE 10 J2 5X/EG96N9K4/M

BALL VALVE; NOMINAL SIZE: 2 " PRESSURE: CLASS 300; FLUIDS: AIR, WATER, OIL, GAS. TEMPERATURE RANGE FROM -20 °C TO +260 °C; DIAL MATERIAL: CARBON STEEL; BODY MATERIAL: FORGED CARBON STEEL; STEP TYPE: NOMINAL

PNEUMATIC SOLENOID VALVE MAXIMUM WORKING PRESSURE: 10 BAR; FLUIDS: AIR; HTTP://WWW.TOLEXO.COM/REXROTH-5-3-DIRECTIONAL-VAL-SERIES-581-SI ZE-2-5812491650.HTML - 5813491650