Katalog JAES

O-RING; OUTER DIAMETER: 4 MM; THICKNESS: 4MM; MATERIAL: VITON; SHORE HARDNESS: 90

COMPLETE FILTER; CONNECTION DIAMETER: 3/8 IN; MAXIMUM OPERATING PRESSURE : 1 BAR; FILTRATE LEVEL: 10 MICRO M; FLUIDS: AIR; ME-5917 1/2 REV C ITEM30

THREADED ROD EYE BOLT; ROD DIAMETER: 0.625 IN; ROD LENGTH: 1.75 IN; HOLE DIAMETER: 0.6250 IN; THREAD TYPE: FEMALE-RIGHT; EYE BOLT NORM: ROD END BEARING; MAXIMUM WORK LOAD: 7400 LB; BALL INNER DIAMETER: 5/8"; CENTER LINE LENGTH: 2-7/8"; MATERIAL: STEEL; FINISH: ZINC

VACUUM MANOMETER (PRESSURE INDICATORS); PRESSURE RANGE: 0-250 B AR; THREAD DIAMETER: 1/4 " NPT; CASE DIAMETER: 2-1/2 M; CONNECTION TYPE: BACK LOWER; 304 STAINLESS STEEL CASE SEALED BEZEL; BOURDON, PHOSPHOR BRONZE; FILLED WITH GLYCERINE, MOVEMENT, MATERIAL BRASS CONNECTION AND RESTRICTOR

GLOBE VALVE; NOMINAL SIZE: 3 IN; MOUNTING TYPE: FLANGED RF ACCORDING TO ANSI B16.5; FLUIDS: AIR, WATER, OIL AND GAS UP TO 450°F (250°C) BODY MATERIAL: CAST CARBON STEEL; PRESSURE: CLASS 150; MANUAL OVERRIDE; ASCENDING STEM; BODY MATERIAL STANDARD: ASTM A21 6 GRWCB; TRIM MATERIAL (STEM, PLUG, SEAT) API NO. 8 (13 C R Y HARDFACED); GENERAL DESIGN AND WALL THICKNESS STANDARD: API 600 / BS 1873; CLASS (PRESSURE-TEMPERATURE) ANSI B16.34; DISTANCE BETWEEN FACES AN SI B16.10; STANDARD FOR TESTING API 598; THE VALVE MUST BE PROVIDED WITH A LOCKING DEVICE SUITABLE FOR USING A PADLOCK WITH A N OMINAL LINK/RING DIAMETER OF 6 - PADLOCK HOLE DIAMETER 8 MM

LOCK OR GATE VALVE; TYPE: ASCENDING STEM; NOMINAL SIZE: 6 IN; MOUNTING TYPE: FLANGED RF ACCORDING TO ANSI B16.5; FLUIDS: AIR, WATER, OIL AND GAS UP TO 450°F (250°C); BODY MATERIAL: CAST CARBON STEEL; PRESSURE: CLASS 150; MANUAL OVERRIDE; BODY MATERIAL STANDARD: ASTM A216 GRWCB; TRIM MATERIAL (STEM, PLUG, SEAT) API NRO 8 (13 CR AND HARDFACED); FLEXIBLE CRADLE TYPE; GENERAL DESIGN AND WALL THICKNESS STANDARD: API 600 / BS 1414; CLASS (PRESSURE-TEMPERATUR A) ANSI B16.34; DISTANCE BETWEEN FACES ANSI B16.10; STANDARD FOR TESTING AP I 598; THE VALVE MUST BE PROVIDED WITH THE PTO LOCKING DEVICE TO USE PADLOCK WITH NOMINAL LINK/RING DIAMETER OF 6 - PADLOCK HOLE DIAMETER 8 MM

SWIVEL JOINT WITH DOUBLE CROSS LENGTH S= 210 MM HUB HOLE 35H7 WITH KEYWAY AND M10 GRUB SCREW HOLE AT 180° FROM THE KEYWAY ON BOTH SIDES. EXTERNAL DIAMETER 80 MM

HOLD ; INTERNAL DIAMETER: 190 MM OUTER DIAMETER: 220 MM; THICKNESS/LENGTH: 15 MM; GASKET TYPE: "C" TYPE RETAINER - ROTARY SHAFT LIP SEALS (FOREIGN STANDARD) DIN 3760

HOLD; INTERIOR DIAMETER: 150 MM; OUTER DIAMETER: 180 MM; THICKNESS/LENGTH: 15 MM; PROFILE TYPE: NITRILE COATED DOUBLE LIP; FLUIDS: OIL; MATERIAL: NITRILE (BLUE); SHORE HARDNESS: 70 -75 SHORE "A"; T EMPERATURE RANGE: -54 TO 121?C; SHEET MATERIAL: 18 GAUGE BLACK SHEET, SPRING: PIANO WIRE.; BRAND 1: INGEL; N-PART 1: BA180; MARK 2: PIT; N-PART 2: 150X180X15 NITRILE COATED DOUBLE LIP

ADAPTER; MATERIAL: ALUMINUM BASE ALLOY CAST; O PLAN NUMBER: 966631353; DIAMETER 9 5/8 "SET

ADAPTER; TYPE: NIPPLE; OUTER TUBE DIAMETER: 1/2 "; L1 THREAD TYPE: MBSPT 1/2"-14; MATERIAL: GALVANIZED IRON; NOMINAL PRESSURE: 10 BAR; WITH NUT.

EQUIPMENT OR ASSEMBLY ASSEMBLY FOR LOCOMOTIVE OR WAGON; POLYURETHANE D WEAR DISC 60/65 S H D DIAMETER

NIPPLE; TYPE: THREADED; NOMINAL DIAMETER: 1/2 "; NOMINAL DIAMETER L1 THREAD: 1/2 "; L1 THREAD TYPE: NPT; NOM. DIAMETER L2 THREAD: 1/2 "; L2 THREAD TYPE: NPT; MAXIMUM WORKING PRESSURE: 150 PSI; MATERIAL: ASTM A53 GALVANIZED; S/STANDARD DIMENSIONS: ASTM A733; LENGTH: 1-1/2 "; GALVANIZED SCHEDULE 40

AXIAL FAN 6 DIAMETER; 11 5V; 37 WATTS; 238-260CFM; WIDTH 5 7/8"; 0.32 AMPS.; HEIGHT 6/34

FAN; TYPE: INDUSTRIAL; MOUNTING TYPE: FLOOR; SPEED: 1300 RPM; SPA DIAMETER: 30 IN; 3 SPEEDS

QUICK COUPLING; TYPE: MALE FITTING; NOMINAL DIAMETER: 1/2 IN THREAD TYPE: NPTF 1/2"X14; WITH HEXAGON FOR 7/8 WRENCH; BRONZE MATERIAL

HANDWHEEL MANUAL REDUCER FOR MANUAL VALVE DIAMETER 14 - 16

SPRING DIAPHRAGM; APPLICATION: GAS AND OXYGEN VALVES, ON-OFF; DIAPHRAGM KIT FOR HEATING VALVE; EXT DIAMETER: 51 MM, WITH SHEET, BRONZE AND SPRING WASHER

BOLT TYPE: HEX HEAD TYPE: HEX HEAD NOMINAL SIZE: 46MM DIAMETER: M30

GEAR COUPLINGS; TYPE: GO-3AMM AGMA FLANGE 2-1/2; INTER.-CUBO 1 DIAMETE R: 65 N6 MM; INTER.-CUBO 2 DIAMETER: 85.7 P7 MM; MAXIMUM NOMINAL TORQUE: 20.9 KNM; LENGTH: 293.5 MM; MAXIMUM EXTERNAL DIAMETER: 208 MM; REFERENC E DRAWING: 4069-02-DAJ-914-003-01; DRAWING NUMBER: 4069-02-DAJ-914-003-0 1; IT MUST COME WITH CENTERING RING