카탈로그 HONEYWELL

ACCESSORY: ML6161A2009 FLOATING ACTUATOR. 24V 50/60HZ. 45 TO 90 DEG STROKE. 90 SEC TIMING. WITH DECLUTCH. FEEDBACK POT DRIVE OPTION. SHIPPED IN CLOCKWISE POSITION WITH 4074ENJ ACCESSORY.

ACCESSORY: ML6161A2017 FLOATING ACTUATOR. 24V 50/60HZ. 45 TO 90 DEG STROKE. 7 MIN TIMING. WITH DECLUTCH. FEEDBK POT DRIVE OPTION. SHIPPED IN CW POSITION WITH 4074ENJ ACCESSORY.

ACCESSORY: ML6161A2025 FLOATING ACTUATOR. 24V 50/60HZ. 45 TO 90 DEG STROKE. 3 MIN TIMING. WITH DECLUTCH. FEEDBK POT DRIVE OPTION. SHIPPED IN CW POSITION WITH 4074ENJ ACCESSORY.

ACCESSORY: ML6174A2002 FLOATING ACTUATOR. 24V 50/60HZ. 45 TO 90 DEG STROKE. 90 SEC. TIMING. WITH DECLUTCH. WITH MIN. POSITION SET SCREW ADJUSTMENT. FEEDBK POT DRIVE OPTION. WITH 4074ENJ ACCESSORY. SHIPPED IN CW POSITION.

ACCESSORY: ML6174A2010 FLOATING ACTUATOR. 24V 50/60HZ. 45 TO 90 DEG STROKE. 3 MIN. TIMING. WITH DECLUTCH. WITH MIN. POSITION SET SCREW ADJUSTMENT. FEEDBK POT DRIVE OPTION. WITH 4074ENJ ACCESSORY. SHIPPED IN CW POSITION.

ACTUATOR: ML7161A2008 MODULATING ACTUATOR (4-20MA OR 2-10VDC). 24V 50/60HZ. 45 TO 90 DEG STROKE. 90 SEC. TIMING. WITH DECLUTCH. FEEDBK POT DRIVE OPTION. CONDUIT CONNECTION COVER. WITH MIN. POSITION SET SCREW ADJUSTMENT. WITH 4074EN

ACTUATOR: Q5020C1009 LINKAGE USE WITH DIRECT COUPLED ACTUATOR AND V5051 CAGE VALVE. STROKE= 1-1/2" AND 1" DRIVE SHAFT.

ACTUATOR ACCESSORY: 32007205-002 ACTUATOR ACCESSORY - DAMPER BLADE DRIVE LEVER (SMALL) USED WITH: ALL ACTUATORS & DAMPERS

ACTUATOR ACCESSORY: 32007205-003 ACTUATOR ACCESSORY - DAMPER BLADE DRIVE LEVER (LARGE) USED WITH: ALL ACTUATORS & DAMPERS

ACTUATOR ACCESSORY: 32007205-004 ACTUATOR ACCESSORY - RETAINING CLIP, DAMPER EXTERNAL DRIVE PIN USED WITH: DAMPER WITH EXTERNAL ACTUATOR MOUNTING (I.E., 32007205-005 KIT)

ACTUATOR ACCESSORY: 32007205-005 ACTUATOR ACCESSORY - DAMPER EXTERNAL DRIVE PIN KIT USED WITH: DAMPER WITH EXTERNAL ACTUATOR MOUNTING (I.E., 32007205-005 KIT)

BONNET ADAPTER KIT: Q5020D1007 LINKAGE USE WITH DIRECT COUPLED ACTUATOR AND GLOBE VALVE. STROKE= 1/2" AND 1/2" DRIVE SHAFT. FOR USE ON COMPETITIVE VALVES USING 32004629-00X BONNET ADAPTER KITS.

DAMPER: M9484D1010 REVERSING, PROPORTIONAL MOTOR USED TO DRIVE BURNER FIRING RATE VALVES, DAMPERS OR AUXILIARY EQUIPMENT. REPLACE M941A,C,D MOTORS. 24 VAC MODUTROL IV MOTOR WITH 150 LB-IN TORQUE RATING.

DAMPER: M9484F1031 MOTOR. DRIVES BURNER FIRING RATE VALVES, DAMPERS OR AUXILIARY EQUIPMENT. PROPORTIONAL, REVERSING.

DAMPER MOTOR: M7215A1008 DAMPER MOTORS BY HONEYWELL PROVIDE 25 LB-IN. TORQUE WITH SPRING RETURN AND 2-10 VDC MODULATING CONTROL OF ECONOMIZER SYSTEMS, VENTILATION DAMPERS AND COMBUSTION AIR DAMPERS USED IN RESIDENTIAL OR COMMERCIAL HVAC EQUIPMENT. • SYNCHRONOUS MOTOR. • QUIET, HIGH EFFICIENCY DRIVE MOTOR. • SPRING RETURNS MOTOR SHAFT TO NORMAL POSITION ON POWER INTERRUPTION. • HIGH IMPACT, GLASS-FIBER REINFORCED PLASTIC CASE IS RUGGED, LIGHTWEIGHT AND CORROSION RESISTANT. • USES Q298B LINKAGE.

DRIVE: 32006630-013 BACNET CARD FOR NXL,NXS DRIVES (NXOPTCJ)

GLOBE VALVE: Q5020A1003 LINKAGE USE WITH DIRECT COUPLED ACTUATOR AND GLOBE VALVE. STROKE= 3/4" AND 1/2" DRIVE SHAFT.

모터

MOTOR BRACKET: Q605D1069 LINKAGE USE WITH MOD IV MOTOR AND DAMPER. INCLUDES MOTOR BRACKET, (3)DAMPER ARM, MOTOR CRANKARM, (4)BALLJOINTS, LEFTHAND DRIVE EAR AND CRANKARM ADAPTER. FOR INTERNAL OR EXTERNAL MOUNTING.

MOTOR BRACKET: Q605H1024 LINKAGE USE WITH MOD IV MOTOR AND DAMPER. INCLUDES MOTOR BRACKET, (3)DAMPER ARM, MOTOR CRANKARM, (4)BALLJOINTS, LEFTHAND DRIVE EAR AND CRANKARM ADAPTER. FOR INTERNAL OR EXTERNAL MOUNTING.