카탈로그 HONEYWELL

ACTUATOR ASSEMBLY: 312817T ACTUATOR ASSEMBLY 3-10, VP513A,B & VP517, 1/2".

ACTUATOR ASSEMBLY: 313744A ACTUATOR ASSEMBLY

ACTUATOR ASSEMBLY: DSP3814 DAMPER/ACTUATOR ASSEMBLY, COUNTER-TOP DISPLAY

ADAPTER: L4006A1959 TRADELINE, VERT OR HOR MOUNT, 40-180F ADJ. SET- POINT, DIFF. 2F FIXED LESS WELL, W/WELL ADAPTER AND HEAT CONDUCTIVE COMPOUND.

ADAPTER: L4064B2228 TRADELINE 5" INSERTION LIMIT STOP: 200F FAN "ON" AT 125F FAN "OFF" AT 100F ADAPTERS.

ADAPTER: M7285Q1008 120 VAC 50/60HZ, 34VA 60LB-IN. 90 DEG ADJ STROKE 30-60 SEC TIMING. 4-20 MA INPUT WITH SPRING RETURN NORMALLY CLOSED, 2 AUXILIARY SWITCHES, W/SCREW TERM ADAPTER, , WITH ADJ ZERO AND SPAN, DUAL SHAFT

ADAPTER: MA206-019 R32 X 1" PEX ADAPTER

ADAPTER: MA206-020 R32 X 1" NPT ADAPTER

ADAPTER: MA206-022 R32 X 1 1/4" SWEAT ADAPTER

ADAPTER: V400A1095 TRADELINE. 3/4 X 3/4, REG. SET AT 3.5 IN WC WITH SIDE OUTLETS. TWO 3/4 X 1/2 AND ONE 1/2 X 3/8 ADAPTERS.

ADAPTER: V800A1476 TRADELINE. 1/2 X 3/4; STRAIGHT THRU BODY PATTERN ONLY; INCL ONE 3/4 X 1/2 ADAPTER, REG. SET AT 3.5 WC. INCLUDES LP KIT.

ADAPTER: V800A1591 TRADELINE. 3/4 X 3/4. REG SET AT 3.5 IN. WC. STRAIGHT THROUGH BODY PATTERN. TWO 1/2X3/4 ADAPTERS.

ADAPTER: V800C1052 TRADELINE. 3/4 X 3/4, REG SET AT 3.5 IN WC. 0.9 IN. WC STEP. WITH SIDE OUTLETS. TWO 3/4 X 1/2 AND ONE 1/2 X 3/8 ADAPTERS.

ADAPTER ARM: 102931/0021 ADAPTER ARM FOR LESS THAN 90 DEG ROTATION. USED WITH Q605.

ADAPTER ASSEMBLY: 203977A ECONOMIZER ADAPTER ASSEMBLY FOR MOUNTING W859 ECONOMIZER TO MODUTROL IV MOTOR.

ADAPTER BRACKET: 220738A ADAPTER BRACKET FOR MODUTROL IV MOTORS, RAISES MOTOR BY 3/4" TO MATCH SHAFT HEIGHT OF OLDER MODUTROL MOTORS.

ADAPTER BRACKET: SERIES 62 MODUTROL IV MOTORS ARE NON-SPRING RETURN FLOATING CONTROL MOTORS USED WITH CONTROLLERS THAT PROVIDE A SWITCHED SPDT OR FLOATING OUTPUT TO OPERATE DAMPERS OR VALVES.

ADAPTER BRACKET: M7284C1000 MODUTROL IV MOTOR BY HONEYWELL IS A NON-SPRING RETURN MOTOR USED TO CONTROL DAMPERS AND VALVES. MOTORS ACCEPT A CURRENT OR VOLTAGE SIGNAL FROM AN ELECTRONIC CONTROLLER TO POSITION A DAMPER OR VALVE AT ANY POINT BETWEEN OPEN AND CLOSED.

ADAPTER KIT: 14004932-001 PNEUMATIC TO ELECTRIC RETROFIT VALVE ADAPTER KIT. LINKS ELECTRIC ACTUATORS M6410/M7410 TO PNEUMATIC VP525 VALVES.

ADAPTOR: 14004236-001 ADAPTOR, MP918 SHAFT TO 5/16 PUSHROD.