Katalog KMC KREUTER

STAT: CTC-1622 2X3 T'STAT;2-PIPE RA

STAT: CTS-1101-16 T'STAT;SYS POWERED;DA

STAT: CTS-1102-16 T'STAT;SYS POWERED;RA

STAT: CTS-1103-16 T'STAT;SYS POWERED;DA/RA

STAT: HFO-0027 T'STAT SET POINT S STRIP

STOP KIT: HMO-4536 STOP KIT; MEP-7000 SERIES

TERMINAL BLOCK: HPO-5061 TERMINAL BLOCK COVER & TERMINAL PLUG FOR MEP-3510 (10/PKG MIN QTY)

TERMINAL BLOCK: HPO-5062 TERMINAL BLOCK COVER & TERMINAL PLUG FOR MEP-3511/16

THERMOSTAT: MEP-4801 ACTUATOR TRI-STATE, NON-FAILSAFE, 24VAC, 80 IN-LBS DESIGNED FOR USE WITH THERMOSTATS, CONTROLLERS, OR BUILDING AUTOMATION SYSTEMS

THERMOWELL: HMO-4532 1 OZ. THERMOWELL COMPOUND; STE-1400 SERIES

TRANSDUCER: KMC XEC-3004 E-P TRANSDUCER, 3-15 PSI OUTPUT, MANUAL OVERRIDE, NO GAUGE. CONVERTING AN ANALOG VOLTAGE (E) OR CURRENT (I) SIGNAL INTO A LINEAR PNEUMATIC (P) OUTPUT SIGNAL FOR ACCURATE POSITIONING OF DAMPER AND VALVE ACTUATORS.

TRAP: HMO-1001 REAR STRAP; MCP-1160/5160

TUBE: HFO-0015 PITOT TUBE; 4"

TUBE: HFO-0016 PITOT TUBE; 6"

TUBE: SAA-1030 SAMPLING TUBE 12 TO 30 IN

TUBE: SAA-1060 SAMPLING TUBE 30 TO 60 IN

TUBE: SAA-1120 SAMPLING TUBE 60 TO 120 INCHES

TUBE ASSEMBLY: HFO-0024 TUBE ASSEMBLY W/ 2 EYELETS

TUBE ASSEMBLY: HFO-0028 TUBE ASSEMBLY W/4 EYELETS

VALVE: MCP-6001 ACT.;VALVE;3-8#;VCP-11/21/34