Catalog HONEYWELL

CARTRIDGE: CA110C1007 REPLACEMENT CARTRIDGE FOR V110D, E, F SERIES VALVES. (CONTACT FACTORY ON OLDER MODELS)

CARTRIDGE: MT110C1011 CARTRIDGE CHANGING TOOL FOR V110 SERIES VALVES.

CARTRIDGE: V200LDSL20 V200 VALVE BODY WITH ADJUSTABLE CARTRIDGE 3/4" TRV STRAIGHT BODY BRONZE, SWEAT INLET/OUTLET NO TAILPIECE

CARTRIDGE: VCZZ1100 REPLACEMENT CARTRIDGE FOR 2 WAY ON/OFF VALVES USED W/ FLOATING ACTUATORS.

CARTRIDGE: VCZZ1400 REPLACEMENT CARTRIDGE FOR 2 WAY ON/OFF VALVES EQUAL PERCENTAGE FLOW CHARACTERISTIC, USED W/ PROPORTIONAL ACTUATORS.

CARTRIDGE: VCZZ6100 REPLACEMENT CARTRIDGE FOR 3 WAY ON/OFF VALVES. LINEAR CHARACTERISTIC, FOR MIXING OR DIVERTING APPLICATION

CHECK VALVE: CCT2090A CHECK VALVE 4LD-020-B00

CHECK VALVE: CVT-050 1/2" FXM CHECK VALVE FOR AM-1 SERIES NPT MODELS

CHECK VALVE: CVT-075 3/4" FXM CHECK VALVE FOR AM-1 SERIES NPT MODELS

CHECK VALVE: SV173 SUPERVENT TOP AIR VENT, 3/8", INCLUDES CHECK VALVE.

CONTROL: VC6831AA1111 1/2" SWEAT VALVE. 3.2 CV LINEAR CONTROL CHARACTERISTIC. 40"(1M) CABLE W/AUXILIARY SWITCH

CONTROL: VC6831AM1111 3/4" SWEAT VALVE. 4.7 CV LINEAR CONTROL CHARACTERISTIC. 40" (1M)CABLE W/AUXILIARY SWITCH

CONTROL: VC6831ML6111 3/4" SWEAT VALVE 5.9 CV LINEAR CONTROL CHARACTERISTIC. 40" (1M) CABLE W/ AUXILIARY SWITCH.

CONTROL: VC6831MS6111 1" SWEAT VALVE 8.6 CV. LINEAR CONTROL CHARACTERISTIC. 40" (1M) CABLE W/AUXILIARY SWITCH.

CONTROLLER: RM7897C1000 CONTROLLER. 120 V, 50/60 HZ. INTERRUPTED PILOT VALVE TERMINAL, 2ND STAGE MAIN VALVE FOR LOW HIGH LOW SYSTEMS. PROGRAMMABLE POST PURGE TIMING AND BLINKUM FAULT ANNUCIATION.

DAMPER: M9484D1010 REVERSING, PROPORTIONAL MOTOR USED TO DRIVE BURNER FIRING RATE VALVES, DAMPERS OR AUXILIARY EQUIPMENT. REPLACE M941A,C,D MOTORS. 24 VAC MODUTROL IV MOTOR WITH 150 LB-IN TORQUE RATING.

DAMPER: M9484F1031 MOTOR. DRIVES BURNER FIRING RATE VALVES, DAMPERS OR AUXILIARY EQUIPMENT. PROPORTIONAL, REVERSING.

DIVERTING VALVE: AM-1 SERIES MIXING VALVE, 3/4", 100-145F, NPT FEMALE ACCURATELY ADJUSTS, MAINTAINS AND LIMITS HOT WATER TEMPERATURE TO A DESIRED SETTING SELECTED BY USER.

DIVERTING VALVE: VGF31LD25 2 1/2" DIVERTING VALVE, CV=63

DIVERTING VALVE: VGF31LD30 3" DIVERTING VALVE, CV=100