Katalog JAES

1 1/2 IN NPT GALVANIZED MALE PLUG

BRUSH; HEIGHT: 25MM; WIDTH: 20MM; TOTAL THICKNESS: 40 MM; QUALITY CODE: RC87; NUMBER OF BRUSHES X THICKNESS: 1

PILOT GUIDE 2

RETAINER 4.1/2" X 5.1/4" X 1/2", OUTER COVER

HOLD; INTERIOR DIAMETER: 240 MM; OUTER DIAMETER: 270 MM; THICKNESS/LENGTH: 15 MM; PROFILE TYPE: SINGLE LIP; FLUIDS: GREASE; MATERIAL: NITRILE; SHORE HARDNESS: 80 A; MAXIMUM WORKING PRESSURE: 7 PSI; TEMPERATURE RANGE: - 40 - 93 °C

PROVISION OF PARTICULATE DETECTOR FOR BATTERY 2 CHIMNEY SS.RED.COQU.BA12-NHD10032_00

FLAT TYPE RESISTANCE FOR HERCAS BRAND HAMMER TYPE ELECTRIC WELDER; OHM VALUE: 162 OHM; POWER: 350 W; RESISTANCE FORM: COMPOSED OF TWO PLATES OF 81 OHMS EACH (96 MM VOLTAGE: 220 V; IDENTIFICATION: H6; ALL IN MICA (WHERE THE CONDUCTOR AND THE SIDE INSULATING PLATES ARE WOUND) AND CONNECTED IN SERIES WITH 150 MM LONG CONNECTION CHICOTS

PADLOCK HOLDER 3-1/2

MASTER RING, CLASS Y WITH ISO CERTIFICATION

MASTER RING, CLASS Y WITH ISO CERTIFICATION

SEAL FOR ROTARY SHAFT; TYPE: DOUBLE LIP WITH SPRING REINFORCED METAL CASE; MATERIAL: VITON; SHAFT DIAMETER: 150 MM; HOUSING DIAMETER: 225 MM; THICKNESS: 15MM; SHORE HARDNESS: 75 A; FLUIDS: OIL; TEMPERATURE RANGE: -25°C TO +220°C; MANUFACTURING STANDARD: ISO 6194 / DIN 3760

PE100 HDPE PIPE - SDR: 17 - NOMINAL PRESSURE: 10 BAR - OUTER DIAMETER: 450 MM ACCORDING TO ISO 4427 STANDARD - IN 12 METER SECTIONS.

MOTOR-REDUCER, REDUCER: TYPE - D88, I = 90.53, V08, N2=15.50 MIN, T2 = 1273/1064 NM, BAUF-B3, OIL CL PVC-220-4.01, MOTOR - AF100L/4H-12, Y/? 400/230V, 380-420/22V,4.8/8.3A, 4.9-4.9A, 2.2 KW, S1, 1405 1/MIN, 160 DEG.C, 0195368, 21 KQ

RUBBER CONVEYER BELT FOR POST PELLETIZER INCLINED DUST CONVEYER DWG#TI-11984-REV 1, ITEM 13

PRESSURE REGULATOR

BEARINGS

REPLACEMENT EMISSION FILTERS, E14 BRUSHING MACHINES