Katalógus Schunk

ROBOT HEAD PLACES PROTECTOR BOX

2 JAW GRIPPERS

MODULE

BRUSHES

STROKE PER CLAMP MM 100 CLOSING FORCE N 900 OPENING FORCE N 900 WEIGHT KG 6.35 RECOMMENDED WEIGHT OF THE PIECE KG 4.5

CSAPÁGYAK

HEIGHT LIMITER 4-8403.5584 UPPER ARM PANTOGRAPH TRAINS MA300

KÁBEL

SEAL KIT FOR PFH-200 GRIPPER

APUCATOR SANFREN MACHINE RATTUNDE PIPE CUTTING MACHINE

SPD PRE-INSTALLED MAGNET MODEL: EGM-B-Q-50-1X4

TAIL VALVE FOR TRAIN PANTOGRAPH PNEUMATIC CONTROL UNIT

HYDRAULIC MACHINE CLAMP: BEVELING CLAMP; DIMENSIONS: 100 X 100 X 74.2 MM CLAMPING FORCE AT MAXIMUM OPERATING PRESSURE: 16 KN STROKE PER JAW: 6 MM JAW HEIGHT: 60 MM REPEATABILITY: 0.01 MM OPERATING PRESSURE: 10 - 120 BAR TRANSMISSION VOLUME PER DOUBLE STROKE : 30 CM³ OPENING HOURS: 1 S WEIGHT: 5 KG

10110010 - THERMOTUBE EPDM-APZ LW 32X4 UPPER ARM PANTOGRAPH TRAINS MA300 CAF REF.FIG.3.1-7 (SCHUNK 10110010). SAFETY RELATED MATERIAL

CONNECTOR; MACHINE: ANTI-COLLISION; USED ON KUKA KR120 ROBOT

INDUCTIVE DETECTOR; MINIMUM RANGE: 1 MM; MAXIMUM RANGE: 1 MM; THREAD TYPE: M8; NUMBER OF THREADS: 3; ELECTRICAL VOLTAGE: 24 VDC; OUTPUT FUNCTION: DIGITAL; CONTACTS TYPE: PNP; BODY MATERIAL: PLASTIC; ELECTRICAL CURRENT: .05 A

GARNISH KIT; FITTING TYPE: FOR GRIPPER; FLUIDS: AIR; MAXIMUM WORK PRESSURE 6 BAR; KIT FOR UNIVERSAL GRIPPER WITH MULTIPLE TEETH GUIDE PGN+300

COMPONENT: GRIPPER; MACHINE: LABELING ROBOT; WITH NOT. POLYTEC "2C18.000225" AND MENTIONED IN POLYTEC DRAWING 2A02.000088, FOR THE LABELER ASSEMBLY, OF THE ROBOT STEEL LABELER. UNIVERSAL GRIPPER CENTERED ON 3 FINGERS WITH HIGH GRIP FORCE AND MAXIMUM MOMENTS THANKS TO THE MULTIPLE TEETH GUIDE THE PISTON IS MOVED UP AND DOWN BY COMPRESSED AIR. THE ACTIVE SURFACES AT THE ANGLE OF THE WEDGE HOOK THEY PRODUCE A SYNCHRONIZED AND CENTERED MOVEMENT OF THE JAW.; MANUFACTURER 1: SHUNK; N-PART 1: PZN-64-PLUS-1