Catalog HONEYWELL

ACTUATOR: VC6934ZZ11 FLOATING ACTUATOR 24/50-60 3WC FL 120 SEC PLENUM FOR VC SERIES VALVES.

ADAPTER BRACKET: SERIES 62 MODUTROL IV MOTORS ARE NON-SPRING RETURN FLOATING CONTROL MOTORS USED WITH CONTROLLERS THAT PROVIDE A SWITCHED SPDT OR FLOATING OUTPUT TO OPERATE DAMPERS OR VALVES.

ADAPTER BRACKET: M7284C1000 MODUTROL IV MOTOR BY HONEYWELL IS A NON-SPRING RETURN MOTOR USED TO CONTROL DAMPERS AND VALVES. MOTORS ACCEPT A CURRENT OR VOLTAGE SIGNAL FROM AN ELECTRONIC CONTROLLER TO POSITION A DAMPER OR VALVE AT ANY POINT BETWEEN OPEN AND CLOSED.

ADAPTER KIT: 14004932-001 PNEUMATIC TO ELECTRIC RETROFIT VALVE ADAPTER KIT. LINKS ELECTRIC ACTUATORS M6410/M7410 TO PNEUMATIC VP525 VALVES.

ADAPTOR: 205699A STEM & BONNET ADAPTOR. FITS 2 1/2- 3" V3350, V3450, V3360, V3460, V3351, V3451, V3361, V3461 VALVES. USE W/ALL HONEYWELL ELEC/PNEU ACT.

BAG ASSEMBLY: ML6161B2024 BY HONEYWELL IS USED TO CONTROL DAMPERS IN APPLICATIONS SUCH AS VARIABLE AIR VOLUME (VAV) TERMINAL UNITS AND FOR MOUNTING ON BALL VALVES; SUITABLE FOR USE WITH SPDT OR FLOATING THERMOSTATS OR BUILDING AUTOMATION CONTROLS.

BONNET ADAPTER KIT: Q5020D1007 LINKAGE USE WITH DIRECT COUPLED ACTUATOR AND GLOBE VALVE. STROKE= 1/2" AND 1/2" DRIVE SHAFT. FOR USE ON COMPETITIVE VALVES USING 32004629-00X BONNET ADAPTER KITS.

CARTRIDGE: 40007029-002 WRENCH TO INSTALL SWEAT CARTRIDGE FOR UNITARY/MODULATING ZONE "VC" VALVES

CARTRIDGE: CA110C1007 REPLACEMENT CARTRIDGE FOR V110D, E, F SERIES VALVES. (CONTACT FACTORY ON OLDER MODELS)

CARTRIDGE: MT110C1011 CARTRIDGE CHANGING TOOL FOR V110 SERIES VALVES.

CARTRIDGE: VCZZ1100 REPLACEMENT CARTRIDGE FOR 2 WAY ON/OFF VALVES USED W/ FLOATING ACTUATORS.

CARTRIDGE: VCZZ1400 REPLACEMENT CARTRIDGE FOR 2 WAY ON/OFF VALVES EQUAL PERCENTAGE FLOW CHARACTERISTIC, USED W/ PROPORTIONAL ACTUATORS.

CARTRIDGE: VCZZ6100 REPLACEMENT CARTRIDGE FOR 3 WAY ON/OFF VALVES. LINEAR CHARACTERISTIC, FOR MIXING OR DIVERTING APPLICATION

DAMPER: M9484D1010 REVERSING, PROPORTIONAL MOTOR USED TO DRIVE BURNER FIRING RATE VALVES, DAMPERS OR AUXILIARY EQUIPMENT. REPLACE M941A,C,D MOTORS. 24 VAC MODUTROL IV MOTOR WITH 150 LB-IN TORQUE RATING.

DAMPER: M9484F1031 MOTOR. DRIVES BURNER FIRING RATE VALVES, DAMPERS OR AUXILIARY EQUIPMENT. PROPORTIONAL, REVERSING.

GLOBE VALVE: ML6420A3049 DIRECT COUPLED ACTUATOR, NSR, 60 SEC TIMING, 3/4" STROKE, 135 LBF, FLOATING CONTROL SIGNAL, USE WITH HONEYWELL THREADED AND FLANGED GLOBE VALVES, 24 VAC.

GLOBE VALVE: ML6420A3056 DIRECT COUPLED ACTUATOR, NSR, 30 SEC TIMING, 3/4" STROKE, 135 LBF, FLOATING CONTROL SIGNAL, USE WITH HONEYWELL THREADED AND FLANGED GLOBE VALVES, 24 VAC.

GLOBE VALVE: ML6421A1017 DIRECT COUPLED ACTUATOR, NSR, 95 SEC TIMING, 3/4" STROKE, 405 LBF, FLOATING CONTROL SIGNAL, USE WITH HONEYWELL THREADED AND FLANGED GLOBE VALVES, 24 VAC.

GLOBE VALVE: ML6421B1040 DIRECT COUPLED ACTUATOR, NSR, 175 SEC TIMING, 1 1/2" STROKE, 405 LBF, FLOATING CONTROL SIGNAL, USE WITH HONEYWELL THREADED AND FLANGED GLOBE VALVES, 24 VAC.

GLOBE VALVE: ML6425A3022 DIRECT COUPLED ACTUATOR, SR STEM DOWN, 3/4" STROKE, 135 LBF, FLOATING CONTROL SIGNAL, USE WITH HONEYWELL GLOBE VALVES, 24 VAC.