Catalog MCGILL

FLAT CAM FOLLOWER SDMCF50 MCGILL

发动机备件 INT. Ø 30MM - OUT. Ø 90MM WIDTH 35MM

MCA BALLBOARD: MCGILL MOD: MR-56N-MI-48N; FOR BALANCIN CABLES HOOK PRINC.P / GRUA NV1

滚筒式轴承

轴承

轴承

SPINDLE FLOATING MECHANISM

MCGILL MI-80-N, ARBOR IDLE INNER RING

轴承

NEEDLE BEARING

环

BEARING: NEEDLE

BEARING OTHER TYPE; BEARING TYPE: CAM FOLLOWER; HARD ROLL TYPE: RAIL ROLLER; INTERNAL DIAMETER: 20X1.5 MM; OUTSIDE DIAMETER: 52 MM; WIDTH: 24MM; BEARING CHARACTERISTICS: CAM FOLLOWER BEARING; ROLLER DIAMETER 52 MM; 24 MM ROLLER WIDTH; FLAT ROLL SURFACE PROFILE; 20MM STUD DIAMETER; THREAD SIZE M20X1.5; STANDARD STUD PROFILE; SEALED ENCLOSURE; NEEDLE BEARING; YES RELUBEABLE; YES HEX

BEARING OTHER TYPE; BEARING TYPE: CAM FOLLOWER; HARD ROLL TYPE: RAIL ROLLER; INTERNAL DIAMETER: 30X1.5 MM; OUTSIDE DIAMETER: 80 MM; WIDTH: 35MM; BEARING CHARACTERISTICS: CAM FOLLOWER BEARING; ROLLER DIAMETER 80 MM; 35 MM ROLLER WIDTH; FLAT ROLL SURFACE PROFILE; 30MM STUD DIAMETER; THREAD SIZE M30X1.5; STANDARD STUD PROFILE; SEALED ENCLOSURE; NEEDLE BEARING; YES RELUBEABLE; YES HEX

INNER RACE 28J002; MACHINE: POSITIONING CHUCKS-THREADERS; 1/2 ID X 3/4 OD X 3/4 LONG

INNER RACE 28J003; MACHINE: POSITIONING CHUCKS-THREADERS; 5/8 ID X 7/8 OD X 3/4 LONG

BEARING TYPE: CAM FOLLOWER; OUTSIDE DIAMETER: 1-1/2 IN; W IDTH: 7/8 IN; SEALED; STUD DIAMETER: 0.625 "; STUD LENGTH: 1-1/2 "; MINIMUM THREAD LENGTH: 3/4 "; FINE THREADS: 5/8 "-18; OIL HOLE CENTER: 3/8 "; OIL HOLE DIAMETER: 3/32 "; LUB FITTING SIZE: 3/16 "; MINIMUM BOSS DIAMETER: 57/64 "; HOUSING BORE: 0.6253 "; RECOMMENDED CLAMPING TORQUE: 650 LB"; MAXIMUM STATIC CAPACITY: 5640 LB; BASIC DYNAMIC RATING: 4840 LB